![]() ![]() Hope someone in the development community can look into this problem and fixed it in the next release. rootDockStar:/ adduser -h /opt/home/openwrt -g 'OpenWRT Development Account' -s /usr/bin/bash -G users -u 102 openwrt Changing. OpenWRT en Seagate FreeAgent Dockstar Seagate FreeAgent Dockstar tiene como objetivo hacer que todas sus cosas estén disponibles en línea. I can easily add a new user as shown below. So it looks like a problem only occurs when using the Kirkwood/Debian/Asterisk 1.8. I compiled/installed busybox (with the Login/Password Management Utilities features) and bash packages on my Seagate DockStar unit from the OpenWRT SVN trunk r33885. I was able to easily install OpenWRT on the device.Read full. It looks like someone was selling working Dockstar pre-installed with OpenWRT/Asterisk 1.8. Fortunately, this device is rather simple, and can be modified with an updated version of Linux. I have installed Mario’s A-1.8 packages ( /20 … voice.html) on ARM based OpenWRT routers with no problem either. I have installed Asterisk 1.8 using the exact same procedure on Ubuntu on an X86 virtual machine without problem. I tried it on SheevaPlug(Kirkwood based)/Debian and had the same issue. Moreover, sip phones can only log into it with null password. ![]() :8078 process_sdp: Got SDP but have no RTP session allocated." The error message was always: "ERROR: rtp_engine.c:325 ast_rtp_instance_new: No RTP engine was found. After install, it will working for a short time. However, once I installed Asterisk 1.8, it was working very unstably. I have been using Dockstar (an Marwell Kirkwood arm based device) with Deian as the Linux system and Asterisk/FreePBX with great success. It only happens in a particular hardware/software combination so it is interesting but difficult to point to the right cause. I am sure you wont have any problem to get your DockStar running OpenWRT with asterisk + Python/PHP, etc. It had been confirmed with a few people so I believe it is real. My FreeAgent Go has a capacity of 600 GB which is plenty but thanks to the additional USB ports the amount of space that. if load $devtype $disknum:1 0x810000 /boot/uEnv.This has been discussed in one of the posts but never been solved. Uenv_read=echo loading envs from $devtype $disknum. Uenv_load=usb start setenv uenv_loaded 0 for devtype in usb do for disknum in 0 do run uenv_read_disk done done ![]() Set_bootargs_usb=setenv bootargs console=$console root=$usb_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts When opkg installing kmod-usb packages, option -force-depends has to be used. Also, although it doesnt break the make, kmod-usb-core doesnt get built when its enabled. Rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=/dev/mtdblock2 ro rootfstype=jffs2 $mtdparts $rescue_custom_params It seems that the usb storage extras are built into the kernel, but enabling kmod-usb-storage-extras breaks the make. Rescue_bootcmd=if test $rescue_installed -eq 1 then run rescue_set_bootargs nand read.e 0x800000 0x100000 0x400000 bootm 0x800000 else run pogo_bootcmd fi Mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) And so, i would like change this default variable to realize this installation :īootcmd=run bootcmd_uenv run bootcmd_usb resetīootcmd_uenv=run uenv_load if test $uenv_loaded -eq 1 then run uenv_import fiīootcmd_usb=run usb_init run set_bootargs_usb run usb_boot i would like put OW on nand of dockstar, not on usb. On my second Dockstar, i put the new Uboot (2015.10) and i would like to put Openwrt Unfortunately, it starts searching a kernel image on usb device.
0 Comments
Leave a Reply. |